Veröffentlichungen

A.W. Momber, M. Irmer

Taber abrasive wear resistance of organic offshore wind power coatings at varying normal forces.

Journal of Coatings Technology and Research (2021), DOI: 10.1007/s11998-020-00437-x

https://doi.org/10.1007/s11998-020-00437-x

A.P. Schaffarczyk, A.W. Momber, V. Stenzel

Wind tunnel investigations of DU97-W-300-mod equipped with riblets.

Wind Energy (2021), DOI: 10.1002/we.2622

https://onlinelibrary.wiley.com/doi/10.1002/we.2622

M. Irmer, A. Momber, T. Marquardt, W. Flügge
Impact damages to organic coating systems of offshore wind turbines - corrosion progress and repair strategies.
Developments in Renewable Energies Offshore (ed. C. Guedes Soares), CRC Press, London, 2020
https://doi.org/10.1201/9781003134572-41

A. Momber, L. Fröck, T. Marquardt
Effects of accelerated ageing on the mechanical properties of adhesive joints between stainless steel and polymeric top coat materials for marine applications.
International Journal of Adhesion and Adhesives, Vol. 103 (2020), 102699
https://doi.org/10.1016/j.ijadhadh.2020.102699

A. Momber, L. Fröck, T. Marquardt
Nachträgliches klebtechnisches Fügen von Haltern auf Beschichtungen mit ungenügender Haftfestigkeit.
Stahlbau, Jg. 89 (2020), DOI: 10.1002/stab.202000066
https://doi.org/10.1002/stab.202000066

Momber, A.W., Irmer, M., Marquardt, T.:
Effects of polymer hardness on the abrasive wear resistance of thick organic offshore coatings.

Progress in Organic Coatings, Vol. 146 (2020), 105720
https://www.sciencedirect.com/science/article/pii/S030094402030415X

A. Momber, L. Fröck, T. Marquardt
Nachträgliches klebtechnisches Fügen von Haltern auf bereits beschichtete Stahloberflächen.
Stahlbau, Jg. 89 (2020), DOI: 10.1002/stab.202000020
https://onlinelibrary.wiley.com/doi/abs/10.1002/stab.202000020

Momber, A.W., Irmer, M., Glück, N.:
Investigation into the performance of a dual-layer thin-film organic coating during accelerated low-temperature offshore testing
ASCE Journal of  Offshore Mechanics and Arctic Engineering, Vol. 139 (2017), Paper 041402, 1-9
http://offshoremechanics.asmedigitalcollection.asme.org/article.aspx?articleid=2612228

Momber, A.W., Irmer, M., Glück, N.:
Effects of accelerated low-temperature ageing on the performance of polymeric coating systems on offshore steel structures
Cold Regions Science and Technology, Vol. 140 (2017), 39-53
https://www.sciencedirect.com/science/article/pii/S0165232X16303202

Momber, A.W., Buchbach, S., Plagemann, P., Marquardt, T.:
Edge coverage of organic coatings and corrosion protection over edges under simulated ballast water tank conditions
Progress in Organic Coatings, Vol. 108 (2017), 90-92
https://www.sciencedirect.com/science/article/pii/S0300944016310463

Momber, A.W., Marquardt, M.:
Protective coatings for offshore wind energy devices (OWEAs): a review. 
Journal of Coatings Technology and Research, Vol. 15 (2018), 13-40
https://link.springer.com/article/10.1007/s11998-017-9979-5

Momber, A.W. u.a.:
Statistical effects of surface preparation and coating type on the corrosion protection performance of repair coatings for offshore wind power constructions
Materials and Corrosion, Vol. 69 (2018), 460-471
https://onlinelibrary.wiley.com/doi/abs/10.1002/maco.201709765

Momber, A.W., Irmer, M., Glück, N.:
A note on the distribution of stationary contact angles on organic coatings.
International Journal of Adhesion and Adhesives, Vol. 72 (2017), 1-5.
http://www.sciencedirect.com/science/article/pii/S0143749616301798

Momber, A.W., Buchbach, S., Plagemann, P., Marquardt, T.:
Effects of edge treatment parameters on the protection performance of organic coating systems in a wave chamber.
Progress in Organic Coatings, Vol. 102 (2016), 167-177.
http://www.sciencedirect.com/science/article/pii/S0300944015303982

Momber, A.W., Buchbach, S., Plagemann, P., Marquardt, T.:
A statistical study into parameter effects on the coverage of organic coatings on rounded steel edges.
Progress in Organic Coatings, Vol. 101 (2016), 186-194.
http://www.sciencedirect.com/science/article/pii/S0300944016305823

Momber, A.W., Irmer, M., Glück, N.:
Hoar Frost Accretion on Organic Coatings Under Offshore Conditions.
ASME Journal of Offshore Mechanics and Arctic Engineering, Vol. 138(6) (2016), 064502 http://offshoremechanics.asmedigitalcollection.asme.org/article.aspx?articleid=2530159

Momber, A.W., Irmer, M., Glück, N., Plagemann, P.:
Corrosion Protection Performance of Organic Offshore Coating Systems at -60 °C Temperature Shock.
ASME Journal of Offshore Mechanics and Arctic Engineering, Vol. 138(6) (2016), 064501 http://offshoremechanics.asmedigitalcollection.asme.org/article.aspx?articleid=2530158

Momber, A.W., Irmer, M., Glück, N.:
Performance characteristics of protective coatings under low-temperature offshore conditions. Part 2: Surface status, hoarfrost accretion and mechanical properties.
Cold Regions Science and Technology, Vol. 127 (2016), 109-114.
http://www.sciencedirect.com/science/article/pii/S0165232X16300611

Momber, A.W., Irmer, M., Glück, N.:
Performance characteristics of protective coatings under low-temperature offshore conditions. Part 1: Experimental set-up and corrosion protection performance.
Cold Regions Science and Technology, Vol. 127 (2016), 76-82.
http://www.sciencedirect.com/science/article/pii/S0165232X16300520

Momber, A.W.:
Quantitative performance assessment of corrosion protection systems for offshore wind power transmission platforms.
Renewable Energy, Vol. 94 (2016), 314–327.
http://www.sciencedirect.com/science/article/pii/S0960148116302439

Momber, A.W., Plagemann, P., Stenzel, V.:
The adhesion of corrosion protection coating systems for offshore wind power constructions after three years under offshore exposure.
International Journal of Adhesion and Adhesives, Vol. 65 (2016), 96-101.
http://www.sciencedirect.com/science/article/pii/S0143749615001931

Momber, A.W., Irmer, M., Glück, N., Plagemann, P.:
Abrasion testing of organic corrosion protection coating systems with a rotating abrasive rubber wheel.
Wear, (2015) DOI: 10.1016/j. wear.2015.11.001.
http://www.sciencedirect.com/science/article/pii/S0043164815004640

Momber, A.W., Plagemann, P., Stenzel, V.:
Performance and integrity of protective coating systems for offshore wind power structures after three years under offshore site conditions.
Renewable Energy, Vol. 74 (2015), 606-617.
http://www.sciencedirect.com/science/article/pii/S0960148114005175

Irmer, M., Glück, N., Momber, A.W.:
Beschichtungssysteme: Verhalten unter arktischen Bedingungen.
Schiff & Hafen, Vol. 66 (2014) No. 9, 180-185.
http://www.schiffundhafen.de/publikationen/schiff-hafen/aktuell.html

Momber, A.W., Buchbach, S., Plagemann, P.:
Untersuchungen zum Korrosionsschutz von Kanten an Stahlkonstruktionen - Ergebnisse der Laborprüfungen (Teil 2).
Stahlbau, Vol. 81 (2012), No. 1, 41-48.
http://onlinelibrary.wiley.com/doi/10.1002/stab.201201502/abstract

Buchbach, S., Plagemann, P., Momber, A.W.:
Untersuchungen zum Korrosionsschutz von Kanten an Stahlkonstruktionen - Problemstellung und Versuchsdurchführung (Teil 1).
Stahlbau, Vol. 80 (2011), No. 1, 30-38.
http://onlinelibrary.wiley.com/doi/10.1002/stab.201001389/abstract

Momber, A.W.:
Corrosion and corrosion protection of support structures for offshore wind energy devices (OWEA).
Materials and Corrosion, Vol. 62 (2011), No. 5, 391-404.
http://onlinelibrary.wiley.com/doi/10.1002/maco.201005691/abstract

Teimouriana, H., Shabgarda, M.R., Momber, A.W.:
De-painting with high-speed water jets: Paint removal process and substrate surface roughness.
Progress in Organic Coatings, Vol. 69 (2010), 455-462.
http://www.sciencedirect.com/science/article/pii/S0300944010002353

Momber, A.W.:
Nachtrag zum Beitrag “Beurteilung von Korrosionsschutzsystemen für Offshore-Windenergietürme - Teil 2: Ergebnisse und Schlussfolgerungen“.
Stahlbau, Vol. 78 (2009), No. 11, 883-884
http://onlinelibrary.wiley.com/doi/10.1002/stab.200990153/abstract

Momber, A.W., Plagemann, P., Stenzel, V., Schneider, M.:
Beurteilung von Korrosionsschutz-systemen für Offshore-Windenergietürme - Teil 2: Ergebnisse und Schlussfolgerungen.
Stahlbau, Vol. 78 (2009), No. 6, 394-401.
http://onlinelibrary.wiley.com/doi/10.1002/stab.200910053/abstract

Momber, A.W., Plagemann, P., Stenzel, V., Schneider, M.:
Beurteilung von Korrosionsschutzsystemen für Offshore-Windenergietürme - Teil 1: Problemstellung und Versuchsdurchführung.
Stahlbau, Vol. 78 (2009), No. 4, 259-266.
http://onlinelibrary.wiley.com/doi/10.1002/stab.200910038/abstract

Momber, A.W., Plagemann, P., Stenzel, V., Schneider, M.:
Investigations into the corrosion protection of offshore wind energy towers: Part 3: Results of the laboratory investigations.
Journal of Protective Coatings and Linings, Vol. 26 (2009), No. 11, 38-46.
http://www.paintsquare.com/archive/?fuseaction=view&articleid=4037

Momber, A.W., Plagemann, P., Stenzel, V., Schneider, M.:
Investigations into the corrosion protection of offshore wind energy towers: part 2: Results of the site tests.
Journal of Protective Coatings and Linings, Vol. 26 (2009), No. 4, 24-34.
http://www.paintsquare.com/archive/?fuseaction=view&articleid=3731

Momber, A.W., Koller, S.:
Effects of surface preparation methods on delamination of organic coatings applied to a metal substrate.
Journal of Protective Coatings and Linings, Vol. 25 (2008), 43-52.
http://www.paintsquare.com/archive/?fuseaction=view&articleid=3211

Momber, A.W., Plagemann, P., Stenzel, V., Schneider, M.:
Investigations into the corrosion protection of offshore wind energy towers: Part 1: General situation and test programme.
Journal of Protective Coatings and Linings, Vol. 25 (2008), No. 4, 30-43.
http://www.paintsquare.com/archive/?fuseaction=view&articleid=3112

Stenzel, V., Plagemann, P., Momber, A.W.:
Les eoliennes offshore sont soumises a rude epreuve.
Galvanic – Organo, Vol. 771 (2007), 31-33.
http://cat.inist.fr/?aModele=afficheN&cpsidt=19978589

Godoy, R., Momber, A.W.:
Preparing offshore platforms with UHPAB – basics and cases.
Journal of Protective Coatings and Linings, Vol. 24 (2007), 36-47.
http://www.paintsquare.com/archive/?fuseaction=view&articleid=2801

Momber, A.W.:
Aspects of salt concentration of prepared steel substrates.
Journal of Protective Coatings and Linings, Vol. 23 (2006), No. 2, M2-M8.
http://www.paintsquare.com/archive/?fuseaction=view&articleid=2407

Momber, A.W., Koller, S.:
Zur Korrosionsschutzwirkung von organischen Beschichtungssystemen auf gestrahlten Stahloberflächen.
Stahlbau, Vol. 74 (2005), No. 10, 780-787
http://onlinelibrary.wiley.com/doi/10.1002/stab.200590177/abstract

Momber, A.W., Greverath, W.-D:
Surface preparation standards for steel substrates - a critical review.
Journal of Protective Coatings and Linings, Vol. 21 (2004) No. 2, 48-52.
http://www.paintsquare.com/archive/?fuseaction=view&articleid=1887

Momber, A.W., Koller, S., Dittmers, H.J.:
Effects of surface preparation methods on adhesion of organic coatings to steel substrates.
Journal of Protective Coatings and Linings, Vol. 21 (2004) No. 2, 44-50.
http://www.paintsquare.com/archive/?fuseaction=view&articleid=2042

Schaffarczyk, A.P., Momber, A., Stenzel, V. 
Wind tunnel investigations of DU97-W-300-mod equipped with riblets. 
Wind Energy, (2021), DOI: 10.1002/we.2622 
https://onlinelibrary.wiley.com/doi/10.1002/we.2622

Momber, A.W., Irmer, M. 

Taber abrasive wear resistance of organic offshore wind power coatings at varying normal forces. 

Journal of Coatings Technology and Research, (2021), DOI: 10.1007/s11998-020-00437-x 

https://doi.org/10.1007/s11998-020-00437-x